Maintenance of Inflatable Tents

- May 19, 2017-

1. To find the leak point, that is, the airbag is cut
2. To cut the same material surface and air leakage to clean the surface, special conditions need to be polished.
3. Before bonding, you should pay attention to the adhesive environment, the operating environment should be kept clean.
4. Brush glue must be uniform, width consistent, can not appear leakage brush or plastic liquid accumulation phenomenon.
5. Brush glue must strictly control the drying time, the first time after the gum drying, the second can be brushed, the second time after the glue drying can be bonded operation.
6. After the glue is finished, it should be parked for more than 24 hours.